EOB-D Series
Product Description
BON (Bay-o-net) Fuse Holder Assembly is an externally removable transformer fuses holder device. It is designed for used in pad-mounted or subsurface distribution transformers with insulated oil or equivalent fluid.
Technical Specification
| Rated voltage |
15/25kV ,35kV |
|---|---|
| Rated Current |
600A ,900A |
| Product Type Number |
EOB260A ,EOB290 ,EOB361 ,EOB362 ,EOB391 ,EOB392 |
| Product Category |
Bushing |
Special Description:
- This series meets all the requirements of the IEEE 386™ - 2016 standard for the Separable Insulation Connector series and can be operated with loaded non-cutting T-cable connectors that meet the same standards.
- These products are made of high quality epoxy materials and have an operating temperature resistance of up to 150°C. They can be used in a wide range of applications.
Table 1 - Electrical Data
| Voltage Ratings | 15/25kV | 15/25kV | 35kV | 35kV | 35kV | 35kV |
|---|---|---|---|---|---|---|
| Rated Load Current Test (A) | 600A | 900A | 600A | 600A | 900A | 900A |
| AC withstand voltage test test (kV) | 40 | 40 | 50 | 50 | 50 | 50 |
| Impulse Voltage Withstand | 125 | 125 | 150 | 200 | 150 | 200 |
| Corona Extinction Level < 3pc (kV) | 19 | 19 | 26 | 26 | 26 | 26 |
| Operating Voltage | ||||||
| Maximum Phase-to-Ground | 15.2 | 15.2 | 21.1 | 21.1 | 21.1 | 21.1 |
| Maximum Phase-to-Phase | 26.3 | 26.3 | 36.5 | 36.5 | 36.5 | 36.5 |
| Type Number | EOB260 | EOB290 | EOB361 | EOB362 | EOB391 | EOB392 |
| Metal Material | Aluminum | Red Copper | Aluminum | Red Copper | Red Copper | Red Copper |
| Body Color | (loanword) hack (computing) | (loanword) hack (computing) | (loanword) hack (computing) | red | red | red |
Table 2 – Standard accessory attachment pack Information
| Type Number | Accessory | Qty |
| EOB260 | Stainless Steel 4-Hole Plate Oil Resistant Gasket Interface Protector (must be unpacked before use) Thread protector (must be unsealed before use) Installation Manual Double head connection bolts |
1 1 1 1 1 0 |
| EOB290 | ||
| EOB361 | ||
| EOB362 | ||
| EOB391 | ||
| EOB392 |
Note:
Double head bolts are not standard for the EOB series. If the customer requires a double-head connection bolt, please request it at the time of ordering; for aluminum conductors, please consider 5/8"-11 aluminum double-head connection bolts with CA suffix after the part number, e.g. EOB260CA(600A); for copper conductors, please consider 5/8"-11 yellow brass double-head connection bolts with CB suffix after the part number, e.g. EOB290CB(900A). after the part number, e.g. EOB290CB(900A).
Image 1. Stainless Steel 4-Hole Plate
Image 2. Rubber Oil Seal Washers
Image 3. Double attachment bolt
